Earthquake 14267 User Manual download pdf (Page 17)

17Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

Operator’s Manual

Chipper/Shredders

Clean Debris from Engine & Chipper

Service Interval: Before each use and every 100 hours.

The engine requires air flow to cool itself and for

combustion. Before each use, clean any debris from the

unit especially from around the air shroud intake, air filter,

and muffler. Every 100 hours, remove the engine air shroud

and clean out any debris from the engine cooling fins (SEE

FIGURE 10). We recommend having this service performed

by an authorized dealer.

Inspect / Rotate Shredding Hammers

Service Interval: Every 25 Hours, or As Necessary

The shredding hammers of this unit can be rotated to

provide a new cutting surface as required. The triangular

hammers can be rotated twice, then flipped over for a total

of 6 sharp cutting surfaces. The J-hammers can be flipped

over once. To inspect the shredding hammers:

 

the spark plug.

2. Remove the small circular access panel (B) from the back

of the shredder housing. SEE FIGURE 11

3. Inspect the cutting edges of the triangular hammers (A)

and J-hammers (A). SEE FIGURES 11 AND 12

To rotate or replace the shredding hammers, see the

Troubleshooting and Repair section.

FIGURE 11

A. J-Hammer Wear Area

B. Access Panel

FIGURE 10 - Clean Debris from Engine Cooling Fins

FIGURE 12

A. Triangular Hammer Wear Area

ns

WARNING

AMPUTATION HAZARD. TO AVOID SERIOUS INJURY

FROM ACCIDENTAL STARTING, ALWAYS DISCONNECT

THE SPARK PLUG WIRE AND SECURE IT AWAY FROM

THE SPARK PLUG WHEN SERVICING THE UNIT.

WARNING

TO AVOID SERIOUS INJURY FROM ACCIDENTAL

STARTING, ALWAYS DISCONNECT THE SPARK PLUG

WIRE AND SECURE IT AWAY FROM THE SPARK PLUG

WHEN SERVICING THE UNIT.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Comments to this Manuals

No comments

Earthquake 14267 User Manual Page 17

Comments to this Manuals

Related products and manuals for Special machinery Earthquake 14267