EarthQuake 300W.2 User Manual download pdf (Page 8)

Drawing 12

Note：All bolt joint points must be coated with thread locking glue.

4 Testing

1. Check all the bolts before the testing to make sure they are all securely tightened.

2. Turn around the mill slightly with hands to check if there is any collision. Fix it there is.

3. For off-grid use, connect all the wires: connect the generator, controller/inverter and the storage batteries with

cables provided as shown in Drawing 13. For in-grid use, connect the generator, controller/inverter and grid as

shown in Drawing 14.

To avoid danger and accident, installation should not be conducted when there is strong wind.

1 2 3 4 5 6 7 8 9 10 11

No comments

EarthQuake 300W.2 User Manual Page 8