Earthquake 6015V User Manual download pdf (Page 10)

Operator’s Manual

6015 Series CRT Rototiller

10 Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

ATTACH HANDLE BAR U.S. MODELS

1. Locate handle bar extensions. SEE FIGURE 2

2. Place handle bar extensions on outside of lower handle bar

mount. Line up the handle bar extension pieces with the

lower handle bar mount as shown in the decal located on

the lower handle bar mount next to the mounting location.

SEE FIGURE 2

3. Insert one 3/8-16 x 1 3/4” bolt for each side in lower holes of the

extension pieces. The bolts will pass through the lower hole of

the lower handle bar mount. Put 3/8” at washers onto bolts.

NOTE: Always put washers on the tubing side of bolts.

4. Hand tighten 3/8-16 nuts on each bolt.

5. Now assemble the handle bar to the handle bar extensions.

Note: Handle bar goes to the outside of the handle bar

extensions.

6. Insert one 3/8-16 x 1-3/4” bolt for each side in lower holes of

the handle bar. Note: Bolts will be going through the upper

holes of the lower handle bar mount along with the middle

holes of the extensions. Put 3/8” at washers onto bolts.

7. Hand tighten 3/8-16 nuts on each bolt.

8. Insert one 3/8-16 x 1 bolt for each side in upper holes of

the handle bar. Bolts will pass through upper holes of the

extensions. Put 3/8” at washers onto bolts.

9. Hand tighten 3/8-16 nuts on each bolt.

10. Tighten 3/8-16 nuts on each of the 6 bolts connecting the

handle bar, handle bar extensions and handle bar mount

together.

ATTACH HANDLE BAR CE MODELS

1. Locate CE handle bar extensions. SEE FIGURE 3

2. Place CE handle bar extensions on outside of lower handle

bar mount. Line up the handle bar extension pieces with the

lower handle bar mount.

3. Insert one 3/8-16 x 1 3/4” bolt for each side in lower holes. Put

3/8” at washers onto bolts.

4. Start 3/8-16 nuts on each bolt.

5. Insert one 3/8-16 x 1-3/4 bolt for each side in upper holes. Put

3/8” at washers onto bolts.

6. Start 3/8-16 nuts on each bolt.

7. Tighten 3/8-16 nuts on each of the 4 bolts connecting the

handle bar extensions to the lower handle bar.

8. CE handle bar extensions should now be securely assembled

to the lower handle bar mount.

9. Now assemble the handle bar to the CE handle bar extensions.

Note: Handlebar goes to the outside of the handle bar

extensions.

10. Insert one 3/8-16 x 1 bolt for each side in lower holes.

11. Start 3/8-16 nuts on each bolt.

12. Insert one 3/8-16 x 1 bolt for each side in upper holes.

13. Start 3/8-16 nuts on each bolt.

14. Tighten 3/8-16 nuts on each of the 4 bolts connecting the

handlebar to the handlebar extension.

FIGURE 2

handle bar extensions

handle bar

lower handle bar mount

FIGURE 3

CE handle bar extensions

handle bar

lower handle bar mount

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Earthquake 6015V User Manual Page 10

Comments to this Manuals

Related products and manuals for Special machinery Earthquake 6015V