Earthquake 6015V User Manual download pdf (Page 18)

Operator’s Manual

6015 Series CRT Rototiller

18 Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

TILLING TIPS

The key to successful tilling is to begin with a shallow cut on the rst

pass, and then work an inch or two deeper on each successive pass.

 

 

hard soil, set the detent pin in the highest hole of the depth

regulator lever (SEE PAGE 11). This will allow for shallow

tilling. With the depth regulator lever in this position, make

several light passes over the area to be tilled. Reset for deeper

depths with successive passes.

     

regulator lever by placing the detent pin in a higher hole. This

will allow for shallower tilling. Hold rmly to the handlebars

to control sudden lurches.

Immediately release the drive control lever if the tines jam or you

strike a foreign object. With drive control lever in neutral position,

push throttle control to stop position to stop the engine. Disengage

the spark plug wire. When tines have stopped, remove foreign

objects and check for damage.

CULTIVATING TIPS

If you plan to use your tiller for cultivating:

 

 

higher holes. This will allow for shallow cultivation necessary

to turn over weeds, and break up and aerate the soil.

WARNING

EXTREME CAUTION MUST BE TAKEN IN SELECTING

TILLING DEPTH. IF YOU ATTEMPT TO TILL TOO DEEPLY

FOR SOIL CONDITIONS, THAT IS, WITH THE DEPTH

REGULATOR LEVER IN TOO HIGH A POSITION, LOSS OF

CONTROL COULD RESULT.

IF REMOVING MATERIAL FROM THE TINES BY HAND,

STOP ENGINE AND REMOVE SPARK PLUG WIRE FIRST.

CAUTION

ALWAYS MAINTAIN CONTROL OF YOUR TILLER. ONLY

OPERATE TILLER IN SOIL CONDITIONS THAT ARE CON

DUCIVE TO MAINTAINING CONTROL OF THE TILLER. DO

NOT OPERATE TILLER IN CONDITIONS THAT CONTAIN

ROCKS FOREIGN OBJECTS, OR ANY OTHER MATERIAL

THAT IS NOT SOIL. IF YOUR TILLER BUMPS, JERKS OR

LURCHES, LET GO OF THE HANDLE BARS AND THE

DRIVE CONTROL LEVERS IMMEDIATELY SO THAT THE

TINES AND WHEELS STOP TURNING.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments

Earthquake 6015V User Manual Page 18

Comments to this Manuals

Related products and manuals for Special machinery Earthquake 6015V