Earthquake 6015V User Manual download pdf (Page 20)

Operator’s Manual

6015 Series CRT Rototiller

20 Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

BELT REPLACEMENT PART #’S:

31315 (forward belt)

CHANGE FORWARD BELT

1. Turn o engine. Engine must be cool.

2. Remove spark plug wire and secure from spark plug.

3. Remove belt guard: SEE FIGURE 10

- unscrew and remove guard rivet.

- pull belt guard from machine.

4. Remove forward belt from engine pulley: SEE FIGURE 11

- gently pull the engine recoil rope to rotate the pulley.

- with the pulley turning, force the forward belt out of the

V-groove.

- slide the belt free of the engine pulley.

- pull the forward belt down and out of the way.

5. Install new forward belt:

- place forward belt in transmission pulley groove.

- gently pull the engine recoil rope to rotate the pulley

while forcing the forward belt into the V-groove.

6. Re-attach belt guard.

7. Attach spark plug wire.

engine pulley

forward belt

transmission pulley

guard rivet

belt guard

FIGURE 10

FIGURE 11

CAUTION

DO NOT OPERATE TILLER BEFORE READING THE EN

GINE MANUAL PROVIDED IN THE PARTS PACKET.

WARNING

TEMPERATURE OF MUFFLER AND NEAR BY AREAS MAY

EXCEED 150° F. AVOID THESE AREAS.

IMPORTANT

ENGINE CAN OVERHEAT AND BECOME DAMAGED IF

DEBRIS BLOCKS THE COOLING SYSTEM OR ROTATING

SCREEN.

NEVER RUN ENGINE WITHOUT COMPLETE AIR CLEANER

INSTALLED ON ENGINE.

forward belt guide

(6015B Shown)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Comments to this Manuals

No comments

Earthquake 6015V User Manual Page 20

Comments to this Manuals

Related products and manuals for Special machinery Earthquake 6015V